platform/scripts/speed-tool/speed.sh

#!/bin/bash

# 检查是否提供了URL参数
if [ $# -eq 0 ]; then
    echo "使用方法: $0 <要测试的URL>"
    exit 1
fi

TARGET_URL="$1"
LINKS_FILE="$(dirname "$0")/links.txt"
HIGH_LATENCY_THRESHOLD=400  # 高延迟阈值，修改为400毫秒
TIMEOUT=10  # curl 超时时间，单位秒
MAX_RETRIES=1  # 失败重试次数

# 检查links.txt文件是否存在
if [ ! -f "$LINKS_FILE" ]; then
    echo "错误: $LINKS_FILE 文件不存在"
    exit 1
fi

echo "开始测试代理速度，目标URL: $TARGET_URL"
echo "--------------------------------------"

# 初始化变量
total_latency=0
count=0
success_count=0
fail_count=0
retry_success_count=0
high_latency_proxies=""
failed_proxies=""

# 读取并测试每个代理
while IFS='|' read -r ip port username password || [ -n "$ip" ]; do
    # 跳过空行和注释行
    [[ -z "$ip" || "$ip" =~ ^# ]] && continue
    
    # 去除可能的空白字符
    ip=$(echo "$ip" | tr -d '[:space:]')
    port=$(echo "$port" | tr -d '[:space:]')
    username=$(echo "$username" | tr -d '[:space:]')
    password=$(echo "$password" | tr -d '[:space:]')
    
    proxy_url="http://$username:$password@$ip:$port"
    echo -n "测试代理: $ip:$port ... "
    
    # 测试逻辑封装成函数以便重试
    test_proxy() {
        local start_time=$(date +%s%N)
        local response=$(curl -s -o /dev/null -w "%{http_code}" --connect-timeout $TIMEOUT --max-time $TIMEOUT -x "$proxy_url" "$TARGET_URL" 2>/dev/null)
        local end_time=$(date +%s%N)
        local latency=0
        
        if [ "$response" = "200" ]; then
            latency=$(( (end_time - start_time) / 1000000 ))
            echo "$response $latency"
        else
            echo "$response 0"
        fi
    }
    
    # 第一次尝试
    count=$((count + 1))
    result=$(test_proxy)
    response=$(echo $result | cut -d ' ' -f 1)
    latency=$(echo $result | cut -d ' ' -f 2)
    
    # 判断是否需要重试
    if [ "$response" != "200" ]; then
        echo -n "失败 - HTTP状态码: $response，正在重试... "
        
        # 重试
        result=$(test_proxy)
        response=$(echo $result | cut -d ' ' -f 1)
        latency=$(echo $result | cut -d ' ' -f 2)
        
        if [ "$response" = "200" ]; then
            retry_success_count=$((retry_success_count + 1))
        fi
    fi
    
    # 处理最终结果
    if [ "$response" = "200" ]; then
        echo "成功 - 延迟: ${latency}ms"
        
        # 累加总延迟
        total_latency=$((total_latency + latency))
        success_count=$((success_count + 1))
        
        # 检查是否为高延迟代理
        if [ $latency -gt $HIGH_LATENCY_THRESHOLD ]; then
            high_latency_proxies="${high_latency_proxies}$ip:$port (${latency}ms)\n"
        fi
    else
        echo "最终失败 - HTTP状态码: $response"
        fail_count=$((fail_count + 1))
        failed_proxies="${failed_proxies}$ip:$port (状态码: $response)\n"
    fi
done < "$LINKS_FILE"

echo "--------------------------------------"

# 输出统计结果
echo "测试结果汇总:"
echo "总测试代理数量: $count"
echo "成功代理数量: $success_count (含重试成功: $retry_success_count)"
echo "失败代理数量: $fail_count"
echo "成功率: $(( success_count * 100 / count ))%"

if [ $success_count -gt 0 ]; then
    average_latency=$(( total_latency / success_count ))
    echo "平均延迟: ${average_latency}ms"
    
    if [ -n "$high_latency_proxies" ]; then
        echo -e "\n高延迟代理 (>${HIGH_LATENCY_THRESHOLD}ms):"
        echo -e "$high_latency_proxies"
    else
        echo -e "\n没有发现高延迟代理。"
    fi
fi

if [ -n "$failed_proxies" ]; then
    echo -e "\n连接失败的代理:"
    echo -e "$failed_proxies"
fi

# 输出延迟分布情况
if [ $success_count -gt 0 ]; then
    echo -e "\n延迟分布统计:"
    # 重新统计以生成延迟分布
    low_latency=0      # <100ms
    medium_latency=0   # 100-200ms
    high_latency=0     # 200-400ms
    very_high_latency=0 # >400ms
    
    while IFS='|' read -r ip port username password || [ -n "$ip" ]; do
        # 跳过空行和注释行
        [[ -z "$ip" || "$ip" =~ ^# ]] && continue
        
        # 去除可能的空白字符
        ip=$(echo "$ip" | tr -d '[:space:]')
        port=$(echo "$port" | tr -d '[:space:]')
        username=$(echo "$username" | tr -d '[:space:]')
        password=$(echo "$password" | tr -d '[:space:]')
        
        proxy_url="http://$username:$password@$ip:$port"
        
        # 只测量一次以获取延迟数据，不进行重试统计
        start_time=$(date +%s%N)
        response=$(curl -s -o /dev/null -w "%{http_code}" --connect-timeout $TIMEOUT --max-time $TIMEOUT -x "$proxy_url" "$TARGET_URL" 2>/dev/null)
        end_time=$(date +%s%N)
        
        if [ "$response" = "200" ]; then
            latency=$(( (end_time - start_time) / 1000000 ))
            
            if [ $latency -lt 100 ]; then
                low_latency=$((low_latency + 1))
            elif [ $latency -lt 200 ]; then
                medium_latency=$((medium_latency + 1))
            elif [ $latency -lt 400 ]; then
                high_latency=$((high_latency + 1))
            else
                very_high_latency=$((very_high_latency + 1))
            fi
        fi
    done < "$LINKS_FILE"
    
    echo "  < 100ms: $low_latency ($(( low_latency * 100 / success_count ))%)"
    echo "100-200ms: $medium_latency ($(( medium_latency * 100 / success_count ))%)"
    echo "200-400ms: $high_latency ($(( high_latency * 100 / success_count ))%)"
    echo "  > 400ms: $very_high_latency ($(( very_high_latency * 100 / success_count ))%)"
fi